thx, Phil, figured it was something like that
‘Thubber’ – Stretchable, thermally conductive rubber for heated garments and robot muscles | Braceworks Custom Orthotics...
I think an El Toro shaped dingy or maybe a nesting dingy with hulls just under 8' with a few properly placed frames to support removable shelves...
thx, nice tip I'd bet if I knew where to look I'd find what I need rusting in a field or junk yard.
thanks. "For the 48”, 60”, 72” Dia. Hemispheres – A special set-up charge is required. These are Fiberglass Molds, The surface finish is not...
I'm mostly needing a fairly precise spherical shape, at also pretty good strength but I'd be adding perimeter frames. I guess I'll be contacting...
I'm all for it. Seems scary that your typical keel boat is going straight to the bottom, and fast, if the hull ever gets even a moderate sized...
Like I said, there will be rails (and wheels or sliders) on each side. I'd be relying on the inherent strength of 3/16 or 1/4" polycarb dome to...
Oh, here we go, sort of. At least someone makes 60" DIAMETER domes. If an American firm is saying "diameter" I'm guessing that means pretty true...
I'd like basically dome shape about 2ftx3ft polycarbonate or plexiglass where the dome is a ball about 5ft diameter. Thing is they should be as...
here is actual unit. as you can see the action-arms are quite short and the tubular cross member is slightly bent. I'm thinking of adding some...
thx, that is something I hadn't considered. My unit had a motor unit that used a push-piston against a short arm with high amount of push force,...
