The sides of the boat are not vertical. The bottom of the boat is 6 in narrower than the beam and this varies to allow the parts to nest fully...
How much better it is when there are pictures !! or diagrams . All I can say is that I will build it and try it and see if it breaks !! The...
Did the above photo by posting the image on a site that does allow images then look at the source which give me the URL and then put onto here....
Trying to get an image to give you an idea. [IMG]
Thanks for that but its a canoe not a boat . Mine is to be 4 ft 6 in beam so the wife and I can sit side by side which means bow first will not...
Lean the biggest section against the trunk lip at 45 deg ...add the other pieces then tip it up level a and push it in. It is not going in...
Thanks I thought I had done that..Looked again but they dont match what I am thinking. Most cut the boat in half but that makes a 12 ft boat too...
Live near a UK canal ...8 to 20 ft wide and need a boat I can carry in the back of my car and store in the garage.Have designed a 12 ft boat that...
written to vic props
Hankai 198cc honda clone . (modified with under water exhaust ).but as the speed limit on the british canals is 4 MPH then having the perfect...
All I can find even with your help is the 2 blade 7 1/2 in for the Hankai 7 HP 4 stroke honda clone...But I use the British canal with a 4 MPH...
Sent a message but not hopeful and not going to be cheap...Michigan wheel dont list anything thanks
just bought an outboard with a 6 spline prop and cannot find any available to give me some choice of pitch ....any suggestions
